Great Plains YP4425A Operator Manual - Manual (Page 49)

Great Plains Manufacturing, Inc. Table of Contents Index Operating Instructions 45
2012-02-23 Table of Contents Index 401-805M
Swath Command™ Clutch Operation
The optional Swath Command™ system replaces the
standard 3-section operator-controlled clutches with 6 or
8 sections of clutches under seed monitor control. If you
have the standard clutches, see “3-Section Electric
Clutch Operation” on page 44.
The Swath Command™ system automatically turns off
rows when the row unit enters a non-planting area (as
defined by a pre-loaded prescription), or if the row enters
an area already logged as planted during prior passes.
Setup and operation of a factory-installed Swath
Command™ system is covered in a separate manual:
Swath Command™ Section Control, publication part
number 403-857M.
Swath Command™ ordering information is found on
page 129.
Figure 50
Swath Command™ Components
34006