Great Plains YP4425A Operator Manual - Manual (Page 128)

124 YP4425A Table of Contents Index Great Plains Manufacturing, Inc.
401-805M Table of Contents Index 2012-02-23
Type 2 Fertilizer Manifold
The Type 2 system includes all plumbing from the rows,
through the planter-mounted ground drive pump, and to
the on-board 2x200 gallon tanks.
The 407-243A kit extends the inlet to the rear hitch for
use with a cart, rather than with on-board tanks.
The wing boom systems are separate for each wing.
The system does not include, and requires:
• a pump (order the 407-213A Ground Drive pump,
page 127)
• a tank system, such as:
- the 407-244A on-board 2x200 gallon tanks,
- an SML-500 or SML-735 semi-mounted cart, or
- the single 400 gallon tank of the PFC2000 cart.
• a trailer pintle hitch weldment, 401-467A (page 127), if
that’s what the cart requires (not required for SML).
Type 3 Fertilizer Manifold
The Type 3 system includes all plumbing from the rows
to the triple bulkhead at the hitch weldment. The boom
system has separate connections and sections for each
planter section (left, center, right), and is compatible with
point-row operation.
The system does not include, and requires:
• a pump, usually provided by the tank cart (PFC1600
and PFC2000 both include a Type 3-capable pump);
• 401-467A trailer hitch weldment (page 127); and
• tank with 3-section outlets (PFC1600 and PFC2000
both include a 3-section manifold).
Description Initial Order
Type 2 Fertilizer Manifold Kit 407-239A
Type 2 Boom Cart Hookup 407-243A
Description Initial Order
Type 3 Fertilizer Manifold Kit 407-240A
29308
29308