Great Plains 2510HDP Operator Manual - Manual (Page 125)

2013-10-21 Table of Contents Index 118-245M
Great Plains Manufacturing, Inc. Table of Contents Index 121
Options
Accessory Hitches
Accessory hitches convert a 3-point drill to a pull-type
drill. In addition to any other capabilities of the hitch, this
allows use of the drill with a tractor that can pull the drill
but not lift it, or a tractor that is not 3-point.
The hitch also increases the weight available for use as
row unit down force, and may accept additional weights
to increase force further.
Depending on model, accessory hitches also include or
support these capabilities:
• Wet fertilizer distribution.
• Frame-mounted coulters for more severe no-till condi-
tions.
• Frame weights.
• Hitch-mounted markers.
Center Pivot Hitches, models CPH-15 and CPH-20, may
be used with 15- and 20-Foot drills.
Precision Fertilizer Hitches, models PFH-15 and
PFH-20, may be used with 15- and 20-Foot drills.
The Sub-Soiler Hitch, model SSH, may be used with
most 3-point drills.
Note: PFH hitches are not compatible with dual-gauge
wheel 15-foot drills, unless a Hitch Setback kit is in-
stalled.
Note: PFH hitches with tanks are not compatible with
drill-mounted markers, unless a Hitch Setback kit is
installed. Or use hitch-mounted markers.
Hitches are a separate product line, with options of their
own. Consult your Great Plains dealer for detailed
configuration and ordering information.
Operations are described in the Hitch Operator’s manual.
Hitch Setback Kit
This accessory extends the 3-point hitch to eliminate
interference with CPH, PFH and SSH auxiliary hitches.
12074
18078
21595
CPH
PFH
SSH
Description Part Number
25 SERIES PFH SETBACK KIT 118-130A
26225