Great Plains 3PYP Operator Manual - Manual (Page 79)

Great Plains Manufacturing, Inc. Table of Contents Index Adjustments 75
2014-09-09 Table of Contents Index 401-312M
Finger Meter Inserts
Refer to Figure 94
The backing plate is equipped with an “A” insert for
Corn, and a “C” insert for Sunflower. In tests, these
inserts provide the best performance in most seed sizes.
However, there are alternate inserts that can be used.
Before changing to a different insert, please consult with
a Great Plains service representative for a
recommendation.
The insert type is molded into the back. Changing inserts
requires meter disassembly.
Meter Reliability Risk:
Be cautious in using seed treatments, additives, and other
chemicals when possible. They can cause meter performance
problems and premature wear. If graphite is used, use
Precision Planting
®
planting graphite or Great Plains
graphite, which is less abrasive. Generally, seeds treated with
Maxi, Captan, and similar coatings benefit from graphite.
Always store meters in a dry, secure place. Moisture,
temperature, nest-building insects and rodents can create
problems. Always pay attention to your seed monitor and
operating manual. Monitor the amount of seed you are
planting compared to expectations. Investigate abnormalities!
Sunflower Meter Configurations
Review the finger pickup meter configuration, based on
the seed size. See chart below. See “Exchanging
Finger Sets” on page 94 for component removal and
installation instructions.
The standard Sunflower configuration is suitable for
#4 and #3 seed sizes. Larger seeds may require the
Corn meter configuration. Using a finger pickup meter for
Confection seeds is not recommended.
Finger Pickup Configurations for Sunflower
Figure 94
Finger Meter Insert
22908
2
1
3
2
Oil Seed Size Confection Seed
#4 #3 #2
Meter Component
(12-finger sunflower) (12-finger sunflower) (12-finger corn)
(Insert C) (Insert C) (Insert A)
c. These components are included in the standard 890-856C Corn meter. 34573
s. These components are included in the standard 890-912C Sunflower meter, and the 403-659A Conversion Kit.
(long, narrow, XL)
~6600 seeds/kg
(~3000 seeds/pound)
~16500 seeds/kg
(~7500 seeds/pound)
~14300 seeds/kg
(~6500 seeds/pound)
~12100 seeds/kg
(~5500 seeds/pound)
Finger Set 343067 s 343067 s 343029 c
Not
recommended
for XL
confection
seed
Backing Plate
I
342108 s 342108 s 342110 c
Brush Block 343091 s 343091 s 343052 c
(brushless
block)
(brushless
block)
(adjustable
brush block)