Great Plains 3PYP Operator Manual - Manual (Page 77)

Great Plains Manufacturing, Inc. Table of Contents Index Adjustments 73
2014-09-09 Table of Contents Index 401-312M
Meter Installation
Installation is the reverse of the removal process, with
two steps omitted.
Refer to Figure 91
1. Insert the meter.
Insert the top meter tab (with the hook).
Align the meter base with the latch plate ears.
Insert the bottom meter tab.
Mind the lower latch, as it tends to swing under the
meter base and block mating with the latch plate.
Refer to Figure 84 on page 71
2. Engage the upper latch.
Refer to Figure 83 on page 71
3. Engage the lower latch, and swing the mounting
plate into engagement with the meter. it may be
necessary to spin the drive coupler to ease this.
Refer to Figure 82 on page 70
4. Slide the seed hose over the meter inlet tube, and
then slide the retaining ring down the seed hose.
Refer to Figure 92
5. Release the upper latch.
Figure 91
Install Meter
25275
3
2
1 1
2
3
Figure 92
Upper Meter Latch
21922