Great Plains 3PYP Operator Manual - Manual (Page 122)

118 3PYP Table of Contents Index Great Plains Manufacturing, Inc.
401-312M Table of Contents Index 2014-09-09
Fertilizer Manifold
The 3PYP supports an optional “wet” fertilizer
distribution system that relies on a tank/pump/filter
system separately provisioned and tractor-mounted. This
system is required if the optional Keeton
®
seed firmers
are to be used for fertilizing.
For operations, see:
“Fertilizer Setup” on page 57, and
the Seed Rate manual.
Fertilizer Orifice Plates
The manifold system includes size 80 plates. To order
alternate plates, use the following part numbers. Order
one per row unit.
82 Bushel Seed Hopper
The 82 bu. hopper may be purchased with the 3PYP or
added later. Only the 82 bu. size is supported on the
3PYP.
The 82 bu. hopper has no prerequisites on the planter,
but you will need a means of top-loading seed when the
hopper is mounted on the seed box. This hopper is
usually too heavy too be safely fork-lifted onto the planter
if already pre-loaded with seed.
The 401-508A kit adds an internal venting system to
older hoppers, permitting consistent seed flow at higher
fan speeds. This kit is not required for new orders of
403-143K hoppers.
For operations, see:
“82 bu.Hopper Operation” on page 36.
Description
Initial Order
Option
Starter Fertilizer Manifold Kit 401-425A
Orifice Size Great Plains Part Number
20 832-052C
28 832-056C
34 832-053C
48 832-054C
59 832-057C
80 832-055C
Description Order Number
82 bu. Bulk Hopper 403-143K
Air Release Field Kit 401-508A
25297
25296