Seed tube brush, Row unit press wheels, Steering – Great Plains 3PYP Operator Manual User Manual
Page 127
Great Plains Manufacturing, Inc.
Options
123
2014-09-09
401-312M
Seed Tube Brush
One brush is provided with the planter. Order the
following part for additional or replacement brushes.
Row Unit Press Wheels
The base 3PYP includes a choice of press wheels.
Additional wheels are available, and all may be
field-installed.
This manual does not list kit part numbers as the
available wheels are often region-specific. Consult your
Great Plains dealer.
For operations, see:
“Press Wheel Adjustment” on page 77.
Steering
The standard 3PYP now includes standard steering,
which is also available as an upgrade for existing
planters with full-castering wheels.
On turns in soft soils and/or on beds, the steering option
is valuable. It prevents castering in backing, and steers
the casters to match the turning radius of the tractor
steering. This relies on a sensor mounted on a tractor
front wheel.
The mechanical, hydraulic and electronic components
are factory-installed on the planter, and configured to
your row spacing. The tractor sensor bracket and
components are normally dealer-installed as part of
pre-delivery setup.
The steering option includes mounting brackets suitable
for the following tractor models:
Case IH
®
MX 220 through MX 285
John Deere 8000 Series with rigid or
ILS front suspension
For steering operations, see:
“Steering Calibration” on page 151, and
“Steering” on page 27.
Description
Order
Number
SEED TUBE CLEANER BRUSH
891-259C
34089
25155
Description
Initial Order
Option
Steering, 20 in., 40 in., 40TR
401-564A
Steering, 15 in., 30 in., 30TR
401-561A
Steering, 36 in., 36TR
401-562A
Steering, 38 in., 38TR
401-563A
25054
25192