Tweco VAF4 Transmig - Manual (Page 33)

TRANSMIG VAF4
Manual 0-5231 3-15 INSTALLATION, OPERATION AND SETUP
3.10 Attaching the MIG Torch (Euro)
Fit the MIG Torch to the power source by pushing the MIG torch connector into the MIG torch adaptor and screw-
ing the plastic torch nut clockwise to secure the MIG torch to the MIG torch adaptor.
MIG Torch Adaptor
MIG Torch Connector
Art # A-11341
Figure 3-6 Attaching MIG Torch (Euro)
3.11 Installing Handle Assembly
!
WARNING
This handle is not designed to lift wirefeeder by mechanical means. Handle is to be used for Lifting by
Hand Only.
For Mechanical Lifting use Lifting Eye Kit W4016700.
The following components are included:
Description Quantity
Handle Assembly 1
Bolt, M10 × 50 (with torque 45~59 N.m.) 2
Flat Washer, M10 (with torque 45~59 N.m.) 4
Spring Washer, M10 (with torque 45~59 N.m.) 2
Nut, M10 (with torque 45~59 N.m.) 2
Table 3-6 Handle Assembly