Tweco HMC-410 - Manual (Page 79)

HMC-410
July 27, 2005 6-7
6.11 Other Available Options
1. Wire Spool Kit 870058
2. Wire Reel Kit 870059
3. Wire Reel / Spool Support Assembly 870060-001
4. Base Plate (For Mounting Feedhead, Wire Reel / Spool Support) 375769-004
5. Base Plate (For Mounting 410 Onto Power Supply)
170962
6. * 60 Lb. Coil Adapter 407142A
7. * 30 Lb. Spool Cover 375582A-004
8. * 60 Lb Spool Cover / Lifting Eye 375733A-001
9. ** Lifting Eye Kit 375104A
10. Semiautomatic Trigger Hold / Subsegment Controls 170925-001
11. Remote Pendant With 15’ Cable (Start, Stop, Inch, Purge) 170470A-002
12. 10’ Remote Pendant Extension Cable 170486-001
13. 35’ Remote Pendant Extension Cable 170486-002
14. 10’ Auxiliary Control Cable 170487-001
15. 25’ Auxiliary Control Cable 170487-002
16. Random Schedule Select Cable 171239-001
17. Dual Feeder Interlock Box 870008-001
18. Inch/Purge Switch For Dual Feeder Interlock Box Only 870023
19. Software Upgrades (Consult Factory) 171238-XXX
20. ¾" Gun Adapter 375999
Table 6-6: Additional Options
* Must Be Used With Both 870058 & 870060-001
** Must Be Used With 870060-001 Only