Product select, pins 16–19, Chassis ground, pin 20, Product select, pins 16–19 chassis ground, pin 20 – Banner PresencePLUS Pro—PRO Camera User Manual
Page 23: New inp
P/N 68368 rev. B
17
01/04
Installation Manual
Controller Terminal Block
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
---------------------------
Product Select, Pins 16–19
The four Product Select inputs can be set to select one of 12 inspections stored on the controller (see the table
below). The inputs must be stable at least 1 ms prior to the leading edge of the Product Select / Change input
pulse.
-----------------------------------------
-------------------------------------------------------------------------------
Chassis Ground, Pin 20
Attach to safety ground.
Product Change Specifications
State
Current Sinking (NPN)
Current Sourcing (PNP)
ON
< 2 volts at 1 milliamp max.
> 8 volts at –7.5 milliamps max.
OFF
> 10 volts at 4 milliamps max.
< 2 volts at –7.5 milliamps max.
Product Select Input Specifications
State
Current Sinking (NPN)
Current Sourcing (PNP)
ON
< 2 volts at 1 milliamp max.
> 8 volts at –7.5 milliamps max.
OFF
> 10 volts at 4 milliamps max.
< 2 volts at –7.5 milliamps max.
Product Select Inputs
ID3
(pin 16)
ID2
(pin 17)
ID1
(pin 18)
ID0
(pin 19)
Inspection #
OFF
OFF
OFF
ON
1
OFF
OFF
ON
OFF
2
OFF
OFF
ON
ON
3
OFF
ON
OFF
OFF
4
OFF
ON
OFF
ON
5
OFF
ON
ON
OFF
6
OFF
ON
ON
ON
7
ON
OFF
OFF
OFF
8
ON
OFF
OFF
ON
9
ON
OFF
ON
OFF
10
ON
OFF
ON
ON
11
ON
ON
OFF
OFF
12