Banner PresencePLUS Pro—PRO Camera - Manual (Page 11)

P/N 68368 rev. B
5 01/04
Installation Manual Warnings and Cautions
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Warnings and Cautions
Read all warnings and cautions in this section before working with PresencePLUS Pro.
------------------------------
------------------------------
Observe the following warnings to avoid personal injury:
• Never use PresencePLUS Pro as a sensing device for personnel protection. Such use could create an unsafe
condition that could lead to serious bodily injury or death.
• Before connecting or disconnecting any cables, be sure the power supply is OFF.
• Never connect PresencePLUS Pro to a power source other than 10–30V dc.
• Keep components at least 250 mm (10
"
) away from power cables.
• Keep components away from high-voltage power sources and motors.
------------------------------------------
----------------------------------------------------------------------
Avoid the damage that electrostatic discharge (ESD) can cause to the camera or controller.
Always use a proven method for preventing electrostatic discharge when installing a lens or attaching a cable.
---------------------------------------------------------------
-----------------------------------------------------------------
The PresencePLUS Pro system has no field-replaceable or user-serviceable components.
To avoid invalidating the Banner warranty, do not disassemble or make electrical or mechanical modifications to
any components.
-----------------------------------------------------------------
-----------------------------------------------------------------
For reliable operation, the installation location must meet the following criteria:
• Stable ambient temperature: 0
° C to +50 ° C (+32 ° F to 122 ° F)
• Ambient relative humidity: 35% to 90%, non-condensing
• Stable ambient lighting: no large, quick changes in light level; no direct or reflected sunlight
• No excessive vibration or mechanical shock
• No contact with corrosive or volatile materials or atmosphere
• No liquid splash
• Minimal dust or dirt
Safety Warnings
Electrostatic Discharge Caution
User Service Caution
Environmental Requirements