Metrohm 793 IC Sample Preparation Module - Manual (Page 8)

1 Introduction
793 IC Sample Prep Module/ 8.793.1003 Instructions for Use
4
Fig. 3: 1.793.0110 SP Module A
1.3 Information about the Instructions for Use
Please read through these Instructions for Use carefully before you put
the 793 IC Sample Prep Module into operation. The Instructions for
Use contain information and warnings to which the user must pay
attention in order to assure safe operation of the instruments.
1.3.1 Organization
These Instructions for Use 8.793.1003 for the 793 IC Sample Prep
Module provide a comprehensive overview of the startup procedure,
operation, fault rectification and technical specifications of these in-
struments. The Instructions for Use are organized as follows:
Section 1 Introduction
General description of instruments, parts and controls
and safety notes
Section 2 Installation
Setting up, mains connection, attachment of accesso-
ries, connection to IC system
Section 3 Operation
Manual operation and operation via 732 IC Detector
Section 4 Faults – Maintenance
Fault rectification, maintenance
Section 5 Appendix
Technical data, standard equipment, options, warranty,
declarations of conformity, index
To find the required information on the instruments please use either
the Table of contents or the Index at the back.
21 21 21 21 Reactor block
22 22 22 22 Actuator connection
with permanently fixed inlet and
outlet capillaries
23 23 23 23 Connection cable
Connection cable to control unit
21 21 21 21 22 22 22 22 23 23 23 23
1
3
2
SP Module A
Ion analysis