ClearCube PCoIP System User's Guide - Manual (Page 92)

6.7 Configuring Video Settings
ClearCube Technology, Inc. 85
6.6.5 Managed Environments Using ClearCube Sentral
Sentral provides a managed environment, in which you can implement the following for your
PCoIP devices:

Standard DHCP address assignment

Reserved DHCP address assignment

Static IP address assignment
When you use Sentral to manage zero clients and hosts, Sentral:

Brokers connections between them

Monitors health and status of managed devices
See Sentral Administrator’s Guide for information about using Sentral to manage hosts and
zero clients.
NOTE: See 3.8 “ Port and Protocol Requirements ” on page 31 and 4.4 “ Mandatory Network-
Related Settings ” on page 39 for information about configuring network devices in your
PCoIP deployment.
6.7
Configuring Video Settings
When deploying zero clients and hosts in your environment, there are various video configuration
steps you can perform through the host card GPU driver and through the Windows operating
system display settings. Basic configuration steps include:

Enabling active displays (and setting VGA configuration for R-series blades). The following
section describes how to enable displays connected to a zero client. Note that the default
video configuration of R-series blades is one VGA display and one DVI display. The VGA
display enables administrators to perform initial blade setup using an analog display. If your
business requirements do not include using a VGA display after initial setup, disable the
default VGA display.
See Tech Bulletin TB00264 for information about resolving potential display issues during
initial setup and the Windows operating system out-of-box experience (OOBE). To view the
Tech Bulletin, see
www.clearcube.com/support/ , select your R-series blade, and then click
Tech Bulletins.