ClearCube PCoIP System User's Guide - Manual (Page 120)

Host cards do not respond to ARP requestsTroubleshooting Firmware Updates
ClearCube Technology, Inc. 113
For more information, see Chapter 2 “ Connection Modes and Network Topology
” on page
12 and
“
Configuring Zero Clients and Host Cards
” on page
62 .
PCoIP does not support all power states
Several power states do not provide power to all system components, preventing PCoIP
components from establishing sessions, maintaining sessions, and from receiving wake requests.
Resolution
Disable any power management settings in the system that would put the system into power
states S1 or S2. As a workaround, note that Standby (S3), Hibernate (S4), and Soft-Off (S5)
are supported.
Host cards do not respond to ARP requests
Host cards do not respond to Address Resolution Protocol (ARP) requests when they are in S4
and S5 power states.
Resolution
Add static ARP cache entries for the host blades that will be powered down.