ClearCube PCoIP System User's Guide - Manual (Page 59)

Chapter 5. Zero Client Controls and Supported Power States
52 PCoIP System User’s Guide
The list below shows indicators and front panel button operations:
Power Button Colors

Green (solid): device is powered on.

Green (blinking): PCoIP session is sleeping. Press any key on the keyboard to wake the
session.

Orange: device is in low-power state and wake-on-LAN (WoL) or wake-on-USB (WoUSB)
is enabled. ClearCube Sentral or third-party utilities can provide WoL and WoUSB features
for devices.
Power Button Operations

Power on: when orange, press briefly (turns green)

Power off: press and hold for 3 seconds (turns orange)
While in session:

when connected to a PCoIP host card, press to display the Zero Client Control Panel (on
monitor) with options to disconnect or power down host device. Press the power button
repeatedly to scroll through options or to cancel.

when connected to a VM, press to disconnect.
PCoIP Session Indicator—shows when a connection, or session, is established between the zero
client and a host. The link indicator displays one of the following:

Green—a session is established between the client and a host.

Off—there is no session between the client and a host.
Smart Card Reader (on supporting models only)

Yellow-Green—smart card reader is powered on.

Red—smart-card has been reset. When red light is flashing, the IC Card is reading or writing.