ClearCube PCoIP System User's Guide - Manual (Page 45)

Chapter 4. Initial Setup
38 PCoIP System User’s Guide
Figure 19. A3100 chassis backplane network port assignments
4.3.3 R-Series Chassis Ports (Network Module)
The picture below shows the rear of the R4300 chassis and the EP2 Pass-Thru Network Module
port assignments.

Connect cables from zero clients to Secondary ports on the rear of the chassis.

Connect cables for standard blade network traffic to the Primary ports on the rear of the chassis.
Ethernet
Dedicated
PCoIP
Ethernet Ethernet
Dedicated
PCoIP
Unsupported
A6105D Blade A6106D Blade