Verify network settings – Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual User Manual
Page 44
Publication ENET-UM527E-EN-P - October 2006
44 Configure a Network Address For a Web Server Module
Verify Network Settings
Select Administrative Settings
> Device Configuration > Network
Configuration. An authenticated user may modify network parameters.
In This Field
Specify
Ethernet Interface Configuration
The network configuration scheme:
• Dynamic BOOTP
• Dynamic DHCP (default)
• Static
IP Address
IP address for the web server module:
If you want to specify a static IP address for the web server module, you must also select
Static for the Ethernet Interface Configuration field towards the bottom of this page.
Subnet Mask
Subnet mask for the web server module.
Default Gateway
Gateway address for the web server module.
Primary Server Name
Secondary Server Name
DNS server names, if using DNS addressing.
Domain Name
Domain name for the web server module, if using DNS addressing.
Host Name
Host name for the web server module, if using DNS addressing.
Name Resolution (DNS)
Whether the web server module uses DNS addressing.