Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual - Manual (Page 33)

Publication ENET-UM527E-EN-P - October 2006
Configure a Network Address For a Web Server Module 33
The module home page displays.
The IP address from the DHCP server provides initial access to the
web server module. Check with your network administrator on
whether you need to modify the IP address for future access to the
module. The network administrator might have you:
• convert the initial IP address to a static IP address.
• enter a different, unique IP address and configure that new
address as a static address.
• do nothing because the DHCP server was configured so that the
initial IP address is already permanently assigned to the web
server module.
• assign a static IP address.
Specify the IP address of the web
server module in the Address
window of your web browser.
This is the module’s Home page.