Rockwell Automation 1440-TPS02-01RB XM-320 Position Module - Manual (Page 101)

Publication GMSI10-UM005C-EN-P - May 2010
DeviceNet Objects 93
Instance Attributes
Services
Analog Input Point Object
(Class ID 0A
H
)
The Analog Input Point Object models simple analog measurements
performed by the XM-320 module.
Class Attributes
Table C.18 Discrete Input Object Instance Attributes
Attr ID
Access
Rule
Name Data Type Description Semantics
3 Get Value BOOL Setpoint Multiplier 0 = Off
1 = On
199 Set Backdoor
Service USINT Setting this attribute is
equivalent to requesting
the specified service. Set to one of the
following values to
perform the
specified service:
0x32 = Open
0x33 = Close
Table C.19 Discrete Input Object Services
Service
Code
Class/Instance Usage Name Description
0E
h
Class/Instance Get_Attribute_Single Returns the contents of the
specified attribute.
10
h
Instance Set_Attribute_Single Sets the contents of the
specified attribute.
32
h
Instance Open Opens the virtual Setpoint
Multiplier switch.
33
h
Instance Close Closes the virtual Setpoint
Multiplier switch.
Table C.20 Analog Input Point Object Class Attributes
Attr ID
Access
Rule
Name Data Type Description Semantics
1 Get Revision UINT Revision of the
implemented object. 2