Rockwell Automation 6723-PCO DATA PROCESS CONFIG OPERATIO - Manual (Page 6)

Process Configuration and Operation Software for Windows t 4
Publication 6723Ć10.1 Ć August 1996
This Quick Start describes how you can easily apply standard PLC
processors in a process control application, using standard
development tools. Here’s how easy it is to use the PCO program:
1. Install the PCO program onto your hard drive on your PC.
PCO
Software
2. Use the PCO Sizing Spreadsheet to determine the system
requirements necessary for your specific control application.
PLC based Process application system sizing
3. Use the PCO Library Manager to create PLC code for use with
your application.
4. Use 6200 programming software to create the JSRs and Data
Table files necessary for your application.
5. Use the PCO Function Configurator to configure your process
functions, and then download the function configurations into the
PLC processor.
6. Use the faceplates to monitor and control your application.
What You'll Be Doing in
This Quick Start