Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 17)

1–5 Introducing PanelBuilder 1400e
Publication 2711E-818 – January 1998
Understanding the Different Network Types
The relationship between the PanelView terminal and the PLC
depends on whether the terminal is part of a Remote I/O, Data
Highway Plus, or ControlNet network. The following illustration
shows the relationship between PanelBuilder, the PanelView
terminal, and the PLC.
In this example, the PanelView terminal is connected by
Remote I/O.
Development Computer
PanelView 1000e/1200e/1400e Terminal (Touch Screen)
Programmable
Logic Controller
The application is created in PanelBuilder on the
personal computer, and downloaded to the
PanelView operator terminal.
Machine or Process
The PLC receives information from the PanelView terminal (input), and uses this to
control the machine or process.
The PLC also sends process status information to the terminal (output).
Remote I/O
Remote I/O
Serial Connection
Allen–Bradley PanelView 1200e
p
Tip: For connection diagrams, see Figures 2.1 through 2.7 in
Chapter 2, “Working with the PanelView 1200/1400e Transfer
Utility,” in the PanelView 1200/1400e Transfer Utility User Manual.
"