Rockwell Automation 1746-NO8V SLC 500 8-Point Analog Output Module/ User Manual - Manual (Page 63)

Publication 1746-UM026A-EN-P - September 2003
Specifications A-3
Table A.3 Configuration and Status Specifications
Specification 1746-NO8I 1746-NO8V
Module ID Code Class 1: 3527
Class 3: 12727
Class 1: 3528
Class 3: 12728
Number of Output Channels 8 8
Current Output Ranges
(selectable for each channel)
•
4 to 20 mA
•
0 to 20 mA
•
0 to 21 mA
•
0 to 21.5 mA
n/a
Voltage Output Ranges
(selectable for each channel)
n/a
•
-10 to +10V dc
•
-10.25 to +10.25V dc
•
0 to 10V dc
•
0 to 5V dc
•
1 to 5V dc
SLC Data Formats
(selectable for each channel)
•
Scaled engineering units
•
Scaled for PID
•
Proportional counts
•
1746-NO4 format
•
User-defined scale
Optional Output Data Parameters
•
User defined scale limits
•
Output clamping limit
•
Output alarm limits
•
Ramp rate/limit
•
Preset fault value
•
Output behavior under fault condition (reset, hold, preset)
•
Alarms latch
•
Reset latched alarms
Error Reporting
•
24V power failure
•
Open current loop
•
Module/SLC resetting
•
Fatal channel error