Rockwell Automation 1756-CFM ControlLogix Configurable Flowmeter Module - Manual (Page 153)

153 Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
Configure Output Behavior with RSLogix 5000 Version 16 and Earlier 153
Copy and Paste the Tags and Logic from the Example to Your Program
1. Minimize the previously existing project and open a new instance of
RSLogix 5000 software.
2. Open the CFM_GenericProfileExample.ACD.
3. In the controller organizer of the CFM_GenericProfileExample project,
expand the User-Defined data types.
4. Copy one of the User-Defined data types.
You must select and copy each of the User-Defined data types
individually.
5. In the previously existing project, paste the copied User-Defined data
type into the User-Defined data type folder.
6. Repeat steps four and five until all of the User-Defined data types
contained in the CFM_GenericProfileExample project have been pasted
into the previously existing project.