Rockwell Automation LPM20 Liquid-Cooled AC Drive with High Performance Drive Control - Manual (Page 14)

1-2 Installation/Wiring
Enclosure Ratings LPM20 drives have the following enclosure rating:
• Open-Chassis Style: Intended to be installed in an enclosure.
LPM20 drives must be placed in an enclosure.
Drive Component Locations LPM20 Liquid-Cooled AC drives with High Performance Drive Control are
comprised of an input components section and a power module section.
Drive Input Component Locations
The input components section contains the following main components.
The numbered items listed below correspond to the numbers used in
Figure 1.1 . Replacement parts are listed in Chapter 3 .
1. Main Circuit Breaker
2. Circuit Breaker Operating Mechanism
3. Capacitor Bank Filter
4. Fan Tray
5. Precharge AC Contactors (3)
6. Fuses, 15A, Primary Control Transformer (2)
7. Control Transformer, 120 VAC, 1 Phase, 3 KVA
8. Ground Lug, 2-600 MCM
9. Inductor
10. Fuses, Precharge Resistors, 20A, 600V (3)
11. Terminal Block, 4-Position
12. Precharge Resistors (3)
13. 115V Fans (2)