Rockwell Automation 22-COMM-D DeviceNet Adapter - Manual (Page 99)

Troubleshooting 8-5
The following diagnostic items can be accessed using DriveExplorer
(version 3.01 or higher).
Module Diagnostic Items in Multi-Drive Mode
No. Name Description
1 Field Flash Cnt The number of flash updates made to the adapter after shipping.
2 Adapter Events The number of events in the event queue.
3 Drv 0 Reference Reference being transmitted from the adapter to DSI drive 0.
4 Drv 0 Logic Cmd Command being transmitted from the adapter to DSI drive 0.
5 Drv 0 Logic Sts Status of DSI drive 0 being received by the adapter.
6 Drv 0 Feedback Feedback from DSI drive 0 being received by the adapter.
7 Drv 1 Reference Reference being transmitted from the adapter to DSI drive 1.
8 Drv 1 Logic Cmd Command being transmitted from the adapter to DSI drive 1.
9 Drv 1 Logic Sts Status of DSI drive 1 being received by the adapter.
10 Drv 1 Feedback Feedback from DSI drive 1 being received by the adapter.
11 Drv 2 Reference Reference being transmitted from the adapter to DSI drive 2.
12 Drv 2 Logic Cmd Command being transmitted from the adapter to DSI drive 2.
13 Drv 2 Logic Sts Status of DSI drive 2 being received by the adapter.
14 Drv 2 Feedback Feedback from DSI drive 2 being received by the adapter.
15 Drv 3 Reference Reference being transmitted from the adapter to DSI drive 3.
16 Drv 3 Logic Cmd Command being transmitted from the adapter to DSI drive 3.
17 Drv 3 Logic Sts Status of DSI drive 3 being received by the adapter.
18 Drv 3 Feedback Feedback from DSI drive 3 being received by the adapter.
19 Drv 4 Reference Reference being transmitted from the adapter to DSI drive 4.
20 Drv 4 Logic Cmd Command being transmitted from the adapter to DSI drive 4.
21 Drv 4 Logic Sts Status of DSI drive 4 being received by the adapter.
22 Drv 4 Feedback Feedback from DSI drive 4 being received by the adapter.
23 DN Rx Errors Current value of the DeviceNet CAN Receive Error Counter register.
24 DN Tx Errors Current value of the DeviceNet CAN Transmit Error Counter register.
25 Data Rate SW Current setting of the adapter 2-bit data rate switch.
26 Node Address SW Current setting of the 6-bit Node address switch.