Rockwell Automation 22-COMM-D DeviceNet Adapter - Manual (Page 133)

Index
Numerics
10-pin linear plug, 2-4
5-pin linear plug, 2-4
A
adapter
adding to the scan list, 4-2
applying power, 2-7
commissioning, 2-1
compatible products, 1-3
components, 1-1
definition, G-1
features, 1-2
grounding, 2-5
illustration, 1-1
installing, 2-1 to 2-7
mapping I/O in the scanner, 4-5
mounting, 2-5 to 2-6
parameters, B-1 to B-4
resetting, 3-11
Single/Multi-Drive mode of
operation, 2-3
specifications, A-1
tools to configure, 3-1
troubleshooting, 8-1
viewing the active configuration,
3-12
applying power to the adapter, 2-7
attentions, 1-4
Automatic Device Replacement
(ADR)
definition, G-1
B
baud rate, refer to data rate
bit definitions for Logic Command/
Status Word, D-1
bus off, G-1
C
cables
DeviceNet, 2-4
DSI Internal Interface, 2-5
catalog number, 1-1
Change of State (COS)
configuring a scanner for, 4-4
configuring an adapter for, 3-8
definition, G-1
class, G-1
Comm Flt Action parameter, B-2
commissioning the adapter, 2-1
communications module, refer to
adapter
compatible products, 1-3
components, 1-1
configuration tools, 3-1
connecting the adapter to the
network, 2-4
Connection object, C-4
controller
ControlLogix, 5-4, 6-8
definition, G-2
PLC, 5-7, 6-11
running Explicit Messages, 6-7
SLC, 5-9, 6-13
ControlLogix
example program for Explicit
Messages, 6-8
example program for I/O, 5-4
example program for Multi-Drive
mode, 7-7 to 7-20
formatting Explicit Messages, 6-2
COS Fdbk Change parameter, B-3
COS Status Mask parameter, B-3