Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 25)

Chapter
3
Configuring the Adapter
Chapter 3 provides instructions and information for setting the
parameters in the adapter.
For a list of parameters, refer to Appendix B , Adapter Parameters . For
definitions of terms in this chapter, refer to the Glossary .
The EtherNet/IP adapter stores parameters and other information in its
own non-volatile memory. You must, therefore, access the adapter to
view and edit its parameters. The following tools can be used to access
the adapter parameters:
Topic Page Topic Page
Configuration Tools 3-1 Setting the I/O Configuration 3-7
Using the PowerFlex 4-Class HIM 3-2 Setting a Fault Action 3-8
Using BOOTP 3-3 Setting Web Features Access 3-10
Setting the IP Address, Subnet
Mask, and Gateway Address 3-5 Resetting the Adapter 3-11
Setting the Data Rate 3-7 Viewing the Adapter Configuration 3-12
Configuration Tools
Tool Refer to . . .
PowerFlex 4-Class HIM
(22-HIM-*) page 3-2
BOOTP Server page 3-3
DriveExplorer Software
(version 3.01 or higher) DriveExplorer Online help
(installed with the software)
DriveExecutive Software
(version 3.01 or higher) DriveExecutive Online help
(installed with the software)