Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 163)

Index I-5
RSNetWorx for EtherNet/IP
definition, G-7
web site, G-7
S
safety precautions, 1-4
scanner
adding to an I/O configuration, 4-2
definition, G-7
Single mode
setting with switch (SW1), 2-2
versus Multi-Drive mode, 7-1
specifications
adapter, A-1
EtherNet/IP address, G-5
EtherNet/IP subnet mask, G-7
status indicators
definition, G-7
locating, 8-1
normal operation, 1-6
troubleshooting with, 8-1
Subnet Cfg 1 - 4 parameters, B-2
subnet mask
definition, G-7
setting with BOOTP, 3-3
setting with parameters, 3-5
switches on adapter
locating, 1-1
setting, 2-2
T
TCP (Transmission Control Protocol),
G-8
TCP/IP Interface object, C-32
technical support, P-2
tools required, 1-3
troubleshooting, 8-1 to 8-10
U
UDP (User Datagram Protocol), G-8
update, see flash update
W
web pages
enabling with switch (SW2), 2-2
for your adapter, 9-1
web site
for DriveExplorer software, G-2
for DriveTools SP software, G-2
for EDS files, G-3
for EtherNet/IP, G-3
for manuals, P-1
wiring, see cables
Z
zero data
configuring the adapter for, 3-8
definition, G-8