Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 162)

I-4 Index
Multi-Drive mode
additional information, 7-22
Explicit messaging, 7-20
ladder logic program example, 7-6
setting with switch (SW1), 2-2
system wiring, 7-3
using, 7-1
versus Single mode, 7-1
N
NET A status indicator
locating, 8-1
troubleshooting with, 8-4
NET B status indicator
locating, 8-1
troubleshooting with, 8-5
network IDs, G-5
Non-Volatile Storage (NVS)
definition, G-6
in adapter, 3-1
in drive, 6-1
O
objects
list of, C-1 to C-35
using for Explicit messages, 6-3
ODVA EtherNet/IP specification, G-3
operating status, 1-6
P
Parameter Group object, C-13
Parameter object, C-9
parameters
accessing, 3-1
convention, P-2
editing, 3-2
list of, B-1 to B-5
numbers, B-1
PCCC, G-6
PCCC object, C-15
ping, G-6
PORT status indicator
locating, 8-1
troubleshooting with, 8-2
power consumption, A-1
PowerFlex drives
4/40 Logic Command/Status, D-1
compatible with adapter, 1-3
definition, G-6
HIM, 3-2
installing adapter on, 2-4
preparing for an installation, 2-1
processor, see controller
programmable logic controller, see
controller
Q
quick start, 1-5
R
Reference/Feedback
definition, G-6
in I/O image, 5-2, 7-4
using, 5-3
Register object, C-6
regulatory compliance, A-1
related documentation, P-1
requested packet interval, 4-6
Reset Module parameter, B-3
ribbon cable, see Internal Interface
cable
RSLinx, P-2
RSLogix
adding devices to the I/O
configuration, 4-2 to 4-7
definition, G-7
saving the I/O configuration, 4-7
using RSLinx with, 4-7