Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 18)

1-6 Getting Started
The adapter uses four status indicators to report its operating status. They
can be viewed on the adapter or through the drive cover. See
Figure 1.2 .
Figure 1.2 Status Indicators (location on drive may vary)
Modes of Operation
Item Status
Indicator
Status
(1)
(1)
If all status indicators are off, the adapter is not receiving power. Refer to Chapter 2 ,
Installing the Adapter , for instructions on installing the adapter.
If any other conditions occur, refer to Chapter 8 , Troubleshooting .
Description
➊
PORT Green Normal Operation. The adapter is properly connected and
is communicating with the drive.
Flashing
Green Normal Operation. The adapter is in the process of
establishing a connection to the drive. This status
indicator will turn solid green or red.
➋
MOD Green Normal Operation. The adapter is operational and is
transferring I/O data.
Flashing
Green Normal Operation. The adapter is operational but is not
transferring I/O data.
➌
NET A Green Normal Operation. The adapter is properly connected and
communicating on the network.
Flashing
Green Normal Operation. The adapter is properly connected but
is not communicating with any devices on the network.
➍
NET B Flashing
Green Normal Operation. The adapter is properly connected and
is transmitting data packets on the network.
Off Normal Operation. The adapter is not transmitting data
packets.
➊
➋
➌
➍
➌
➍
➊
➋
Bottom side
of adapter board