Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 161)

Index I-3
full duplex, see duplex
G
gateway, G-4
gateway address
setting with BOOTP, 3-3
setting with parameters, 3-5
Gateway Cfg 1 - 4 parameters, B-2
grounding the adapter, 2-4
H
half duplex, see duplex
hardware address
definition, G-4
on label, 3-3
HIM (Human Interface Module)
accessing parameters with, 3-1
definition, G-4
using PowerFlex 4-Class HIM, 3-2
hold last
configuring the adapter for, 3-8
definition, G-4
host IDs, G-5
I
I/O
about, 5-1
configuring the adapter for, 3-7
configuring the scanner or bridge
for, 4-5
definition, G-5
examples, 5-3, 7-6
image, 5-2, 7-4
Identity object, C-2
Idle Flt Action parameter, B-4
installation
applying power to the adapter, 2-6
commissioning the adapter, 2-1
connecting to the drive, 2-4
connecting to the network, 2-3
preparing for, 2-1
Internal Interface cable
connecting to the adapter, 2-4
connecting to the drive, 2-4
illustration, 2-4
IP Addr Cfg 1 - 4 parameters, B-2
IP address
definition/classes, G-5
setting with BOOTP, 3-3
setting with parameters, 3-5
L
LEDs, see status indicators
Logic Command/Status
bit definitions, D-1
definition, G-6
in I/O image, 5-2, 7-4
using, 5-2
M
MAC address, see hardware address
manual
conventions, P-2
related documentation, P-1
web site, P-1
mechanical dimensions, A-1
messages, see Explicit Messages or
I/O
MOD status indicator
locating, 8-1
troubleshooting with, 8-3
Mode parameter, B-1
modes of operation, 1-6
mounting the adapter, 2-4 to 2-5