Rockwell Automation 20B PowerFlex 700 Drives - Frame 10 Components Replacement - Manual (Page 7)

Rockwell Automation Publication 20B-IN026B-EN-P - July 2013 7
Preface
Introduction This publication provides guidelines for replacing the major components in the
PowerFlex 700 Frame 10 drive.
The PowerFlex 700 Frame 10 drive is available in AC input and DC input. AC
input drives ship as two separate units (inverter and converter) that must be
connected when installed on site, and DC input drives ship as one unit (inverter).
See Overview on page 13 for more details.
The PowerFlex 700 Frame 10 drive is available in two enclosure types:
• IP00, NEMA/UL Type Open
• IP20, NEMA/UL Type 1
The IP00 enclosure type is shown in most visual aids throughout the manual.
Any component replacement information specific to the IP20 enclosure type is
noted as IP20 version only.
889.0
(35.00)
Inverter Assy. Converter Assy.
1267.7
(49.91)
757.7
(29.83)
503.7
(19.83)
2373.9
(93.46)
120
IN1 120
IN2 3 4 5 6
DC+
DANGER
DANGER
DANGER
TB9 8 AMPERES RMS MAXIMUM
120
IN1 120
IN2 3 4 5 6
V W U
TB11 PE 25 AMPERES RMS MAXIMUM
GND
RISK OF SHOCK
REPLACE AFTER SERVICING ! DANGER
RISK OF SHOCK
REPLACE AFTER SERVICING ! DANGER
RISK OF SHOCK
REPLACE AFTER SERVICING ! DANGER
TB10 8 AMPERES RMS MAXIMUM
120
IN1 120
IN2 3 4 5 6 TB10 8 AMPERES RMS MAXIMUM
GND
RISK OF SHOCK
REPLACE AFTER SERVICING ! DANGER
543.1
(21.38)
Inverter Assy.
IP00, NEMA/UL Type Open IP20, NEMA/UL Type 1
Converter Assy.
1267.7
(49.91)
757.7
(29.83)
503.7
(19.83)
2275.8
(89.60)
475
(18.7)
252.7
(9.95)
445.8
(17.55)
353.8
(13.93)
591.3
(23.28)
All dimensions are in millimeters and (inches).