beautypg.com

SDC Z7835 SERIES MORTISE LOCK User Manual

Page 6

background image

Any suggestions or comments to this instruction or

product are welcome. Please contact us through

our website or email [email protected]

A. Door Preparation:

1. Measure desired height from finished floor, mark a horizontal line on door and door edge.

2. Align template on edge of door with applicable horizontal at height line. Check the chart for drilling trim

holes on template and mark only holes for lock function being installed.

3. Mortise door edge according to measurements on

installation template and drill proper holes for trim.

4. Recess for face plate, the dimension is:

L 8-1/32" x W 1-5/16" x D 7/32".

Height line

of lever

or knob

C

L

7/32"

INSTALLATION INSTRUCTIONS

24VDC Z7835 SERIES MORTISE LOCK

of cylinder

of lockcase

of lever

or knob

Vertical centerline

C

Installation

template

C

L

C

L

C

L

L of

door edge

OPTIONAL
DOOR CORE DRILLING GUIDE
#7000-DG

P:\INSTALLATION INST\Electrified Lockset\INST-Z7835 (24VDC) REV D 05-13 Page 1

801 Avenida Acaso, Camarillo, Ca. 93041 • (805) 494-0622 • Fax: (805) 494-8861
www.sdcsecurity.com • E-mail: [email protected]