beautypg.com

SDC Z7835 SERIES MORTISE LOCK User Manual

Page 2

background image

B. Strike Installation:

1. Align strike template on jamb. Be sure to keep 3/8" distance between lock centerline and strike

centerline. Recess 5/32" for flush fit of strike and dust box.

2. Mortise jamb according to measurement of strike template. Then fit strike and dust box into frame

and secure into place with supplied screws.

4-7/8"

3-17/32"

CL

Strike

Lock CL

3/8"

3/8"

1" Holes

1-1/8" Deep

CL

Jamb

Pull out and turn

1. Change latchbolt handing

If the hand of the latchbolt doesn’t match the door hand, remove the fixing screw and pull the latchbolt out from
lock case. Turn the latchbolt 180 ° to change the handling. Position latchbolt back, into case and fasten it.

Instructions for changing latchbolt handing:

C. Install Lockcase

Remove screw

P:\INSTALLATION INST\Electrified Lockset\INST-Z7835 (12VDC) REV A 05-13 Page 2