beautypg.com

SDC Z7835 SERIES MORTISE LOCK User Manual

Page 4

background image

6. Screw inside lever into position and tighten lever collar with spanner wrench.

3. Install inside spring cage onto the spindle with the arrow pointing in the direction of inside lever rotation.

4. Install inside mounting plate onto spindle. Tighten with provided screw.

5. Cap inside rose over mounting plate.

1. Screw cylinder into threaded hole of lock case.

2. Tighten the setting screw against cylinder(s) by turning clockwise as shown.

3. Install face plate onto lock case front and fasten with supplied screws.

F. Install Cylinder and Armor Face Plate

E. Install Lever trim (Continued)

Spanner wrench

USE THIS CAM.

P:\INSTALLATION INST\Electrified Lockset\INST-Z7835 (12VDC) REV A 05-13 Page 4