SATEC PM296 - Manual (Page 42)

Chapter 4 Setup Menus 34
To select an option sub-menu:
From the upper window, use the up/down arrow keys to scroll to the desired sub-menu
(time, date, weekday, or DST).
To change time, date, day of week (not seconds) or DST setting:
Press to activate the desired item. When in the time setup sub-menu, the hour
and minutes indications are now frozen to allow you to adjust them.
Use the up/down arrow keys to set the value.
Set the other items in the same manner.
To update the RTC with your new setting (and to reset seconds):
From the middle or lower window, press .
If you want to reset seconds, press to activate the seconds window, and then
press while the seconds window is flashing.
To quit the sub-menu without changes:
From the middle or lower window, press .
To quit the RTC menu:
Press .
SELECT
SELECT
ESC
ENTER
ESC
ENTER