SATEC EM920 Operation Manual - Manual (Page 51)

Chapter 3 Using Front Display
Programming Mode
EM920 Power Quality and Revenue Meter 51
To exit the submenu and return to the main menu:
1. If the upper-right window is not highlighted yet,
highlight it by briefly pressing the SELECT/ENTER
button.
2. Press the SELECT/ENTER button for more than 1
second. You will return to the main menu.
To exit the main menu and return to the data display:
1. Press briefly the SELECT/ENTER button to highlight the
right-upper Exit window.
2. Press the SELECT/ENTER button for more than 1
second. You will return back to the data display.
LONG PRESS ENTER
SCROLL
LONG PRESS ENTER
SHORT PRESS SELECT
LONG PRESS ENTER