SATEC EM920 Operation Manual - Manual (Page 145)

Chapter 7 Monitoring Meters
Viewing Real-time Data
EM920 Power Quality and Revenue Meter 145
Chapter 7 Monitoring Meters
Viewing Real-time Data
Real-time data is continuously retrieved from your devices
and updated on the screen at the rate you defined in the
Instrument Setup.
To get real-time data from your device:
1. Ensure that the On-line button on the PAS toolbar is
checked.
2. Select the device site from the list box on the PAS
toolbar.
3. Point to RT Data Monitor on the Monitor menu, and
then select a data set you want to view.
Organizing Data Sets
PAS supports 33 programmable data sets with up to 40 data
parameters. Set #0 is intended for simple meters, which
have a limited number of parameters, and is not
recommended for the use with the EM920. To re-organize
data sets, select RT Data Sets from the Monitor menu or click
on the button
on the local toolbar.
Some data sets are preset for your convenience and others
are empty. You can freely modify data sets.