SATEC EM920 Operation Manual - Manual (Page 46)

Chapter 3 Using Front Display
Data Displays
46 EM920 Power Quality and Revenue Meter
Meter identification info: serial number, production
date and calibration date
Meter operation time counters (since start of
operation):
Start of operation date
Total operation time in hours
Out of service time in hours
Total number of power failures
Total number of 3-phase voltage interruptions
Internal meter temperature
Lithium battery status, replacement date and
operation time in hours
Meter firmware information:
Host processor firmware version
Fast transient coprocessor firmware version
Host boot loader firmware version
Program and data flash memory size
Type of the communication expansion module
Type if the I/O expansion module
Serial communication ports info:
Network address, baud rate and communication
protocol.
Ethernet network info:
Device MAC address
Network IP address
Default gateway IP address
Wireless GPRS network info (with a GPRS module):
Network IP address
Received signal strength indicator (RSSI), dBm