SATEC EM920 Operation Manual - Manual (Page 48)

Chapter 3 Using Front Display
Programming Mode
48 EM920 Power Quality and Revenue Meter
Programming Mode
To enter programming mode from the data display, press and
hold the SELECT/ENTER button for more than 5 seconds.
Navigation Buttons
The following table gives a summary of the button operations
in programming mode.
Button Press Operations
SCROLL Short press Scroll through a menu item list in a
highlighted window or increment a
highlighted digit in a numeric field
SELECT/ENTER Short press (less than
1 second) = SELECT
Highlight a menu window or a digit in a
numeric field
SELECT/ENTER Long press (1 to 2
seconds) = ENTER
Store the changed item or perform an
action indicated in a highlighted window
Entering Numeric Values
Whenever a numeric value is to be changed, use a short
press on the SELECT/ENTER button to highlight a desired
digit, and then use the SCROLL button to change the value of
the highlighted digit. A highlighted digit appears in inversed
color. If you missed a digit, just continue moving through the
rest of digits until you reach the desired place.
Once the number is set to the desired value, press and hold
the SELECT/ENTER button for 1-2 seconds to save your new
setting.
SCROLL
LONG PRESS ENTER
SHORT PRESS SELECT