SATEC C192PF8-RPR - Manual (Page 41)

Chapter 4 Setup Menus 36
4.10 Access Control Menu
This menu can be only accessed via the Setup Change Menu (CHG). It is used in
order to:
• change the user password
• enable or disable password check
To view an option setting:
Press to activate the middle window.
Use the up/down arrow keys to scroll to the desired option (PASS or CtrL).
Password Setting Password Protection Control
To change the password:
Press to activate the lower window.
Use the up/down arrow keys to modify the password. The password can be
up to four digits long.
Press to store your new password, or to leave the password
unchanged.
To enable/disable password checking:
Press to activate the middle window, and then use the up/down
arrow keys to move to the CtrL entry.
Press to activate the lower window.
Use the up/down arrow keys to change the password checking status: select
OFF to disable password protection, or select On to enable password
protection.
Press to store your new option, or to leave the option
unchanged.
To quit the setup menu:
From the middle window, press or .
Store your password in a safe place. If you do not provide the correct
password, you will need to contact your local distributor for the super-user
password to override password protection.
SELECT CHG AccS ENTER ENTER
SELECT
SELECT
SELECT
SELECT
AccS
8780
PASS
AccS
OFF
CtrL
ENTER ESC
SELECT ESC
ESC ENTER