SATEC C192PF8-RPR - Manual (Page 39)

Chapter 4 Setup Menus 34
To select a display option:
Press to activate the middle window, and then use the up/down arrow
keys to scroll to the desired option.
To change the display option:
Press to activate the lower window.
Use the up/down arrow keys to set the desired option.
Press to store your new setting or press to leave your previous
setting unchanged.
To quit the display setup menu:
From the middle window, press or .
4.9 User Selectable Options Menu
This menu allows you to change options which relate to the instrument features
and functionality. Table 4-10 lists all available options with their code names and
applicable ranges.
To select an option:
Press to activate the middle window, and then use the
up/down arrow keys to scroll to the desired option.
To change the selected option:
Press to activate the lower window.
Use the up/down arrow keys to set the desired value.
Press to store your new setting or to leave the
previous setting unchanged.
To quit the display setup menu:
From the middle window, press or .
Table 4-10 User Selectable Options ( ∗ default setting)
Code Parameter Options Description
P.cAL Power calculation
mode rEAc *
nAct
Using reactive power
Using non-active power
roLL Energy roll value 10.E4
10.E5
10.E6
10.E7
10.E8
*
10,000 kWh
100,000 kWh
1,000,000 kWh
10,000,000 kWh
100,000,000 kWh
SELECT
SELECT
OPtS
rEAc
P.cAL
ENTER ESC
ESC ENTER
SELECT CHG OPtS ENTER ENTER
SELECT
SELECT
ESC
ESC ENTER
ENTER