Code options – Opticon XPT 3125 Universal menubook User Manual

Page 50

Code options

OPTICON Universal menu book

U43

It is possible to configure a fixed length or a
minimum and a maximum length for selected
symbologies by reading the respective option
followed by a barcode label with the required
length. The different functions may be
combined and will be used as follows:

• if a label is checked for fixed length, it will not

be checked for minimum or maximum length

• if a label is not checked for fixed length it will

be checked for both minimum and maximum
length

By reading an option followed by the 'END'
label, the function is disabled or the values for
that option are reset to their default. The default
values are:
• fixed: disabled, thus no fixed length checking
• minimum: according to the next figure (The

minimum length of the 2of5 bar code types
can not be changed independent.)

• maximum: disabled, thus no maximum length

checking. (The maximum length is reader
dependent)

See figure 3.07.

Fixed length ON for selected codes:
This option enables fixed length checking for
different bar code types and will only affects the
bar code types read. The number of fixed
lengths which can be configured is reader
dependent.

Scan bar codes of the required type and length

Example:
The 2 examples shown in the next figure have
the following results: In the first example only
Code 39 labels will be checked for a length of 6
characters. Any other bar code type will not be
checked for fixed length. In the second example
Code 39 labels will be checked for a length of 6
characters and Interleaved 2of5 labels for a
length of 12 characters. This implies that also
Industrial 2of5, Matrix 2of5 and S-Code are
checked for a fixed length of 12 characters. Any
other bar code type will not be checked for fixed
length. See figure 3.08.

Fig. 3.07. Setting Minimum length table

Code type:

Codabar

Code 11

Code 39

Code 93

Code 128

Industrial 2of5

Interleaved 2of5

IATA

Matrix 2of5

MSI/Plessey

UK/Plessey

GS1Databar-expanded

S-Code

Telepen

Minimum length

Fig. 3.08. Setting Fixed length ON

selected codes

SET

Fixed length ON

for selected only

Scan a label,

i.e. Code 39

with length = 6

Scan a label,

i.e. Interleaved 2of5

with length = 12

END

SET

Fixed length ON

for selected only

Scan a label,

i.e. Code 39

with length = 6

END

This manual is related to the following products:

PHL 5300 Universal menubook PHL 5200 Universal menubook PHL 5100 Universal menubook OPV 1001 Universal menubook OPT 6125 Universal menubook OPT 5000 Universal menubook OPT 1000 Universal menubook OPR 4001 Universal menubook OPR 3301 Universal menubook OPR 3201 Universal menubook OPR 3101 Universal menubook OPR 3004 Universal menubook OPR 3001 Universal menubook OPR 2001 Universal menubook OPN 2003 Universal menubook OPN 2002 Universal menubook OPM 2000 Universal menubook OPM 1736B Universal menubook OPL 9736 Universal menubook OPL 7836 Universal menubook OPL 7736 Universal menubook OPL 7734 Universal menubook OPL 7724 Universal menubook OPL 6845R Universal menubook OPL 6845 Universal menubook OPL 6835 Universal menubook OPL 6735 Universal menubook OPL 5850 Universal menubook OPL 2724 Universal menubook OPI 4012 Universal menubook OPI 4002 Universal menubook OPI 2201 Universal menubook OPI 2002 Universal menubook OPD 7435 Universal menubook OPD 7124 Universal menubook NLV 2101 NLV 2001 NLV 1001 NFT 7345 NFT 7175 NFT 1195 NFT 1175 NFT 2100 NFD 1267 MSH 220 wedge LMD 1135 H19 Universal menubook H16 Universal menubook Universal menubook С-37 Universal menubook