Magna-loc, Correct 6' - 8' max, Incorrect – Metal Sales Magna-Loc Installation User Manual
Page 33
© Metal Sales Manufacturing Corporation / Subject to change without notice 6/12
33
MAGNA-LOC
When handling painted steel care should be taken to prevent scratching of material. Clean gloves should be worn at all times
to prevent a reaction with salts found on bare skin. Installers should wear rubber sole shoes to keep from scuffing material
while walking on the roof.
Handling of individual panels should be done carefully and properly to avoid bending or damaging. Magna-Loc panels
should be carried by grasping the edge of the panel so that the Magna-Loc panel is vertical to the ground. The Magna-Loc
panel should not be carried with the panel horizontal to the ground as this could cause the panel to buckle or bend in the
center.
Normally individual panels can be handled by people placed every 6'-0" to 8'-0" along the length of the panel.
MANUAL HANDLING
CORRECT
6' - 8' MAX
HANDLING MATERIAL (
cont
.)
INCORRECT