Kinze 3700 Front Folding Planter Rev. 7/14 - Manual (Page 26)

M0233-01 Model 3700
2-16 Rev. 10/11
TM
Machine Operation
4. Raise planter to remove weight from center lift (slave) cylinder safety lockups. Remove pins and safety lockups
and place in storage location.
Safety lockups in storage position Safety lockups in transport position
nOTe: automatic safety lock will release when planter is raised to remove weight from center lift cylinder
lockups. raising planter too high will reset the mechanism. if this happens, lower machine until hydraulic
system stalls against the automatic safety, raise machine slightly to release automatic safety lock
and then lower planter.
5. Lower machine to ground. Center drops until
toolbar is level and then entire planter lowers
evenly. Hold tractor’s hydraulic lever 5 to 10
seconds to rephase system when all lift cylinders
are fully retracted.
6. Remove and store marker lockups.
row marker safety lockup stored row marker safety lockup installed
Lowering planter