Kinze 3700 Front Folding Planter Rev. 7/14 - Manual (Page 17)

TM
Model 3700 M0233-01
Rev. 10/11 2-7
Machine Operation
6. (If applicable) Install PTO pump onto tractor PTO shaft. Make sure shaft rotation matches direction indicated on
pump housing.
NOTICE
Clean and grease pTO shaft coupling with high-pressure industrial
coupling grease (Chevron
® coupling grease or equivalent) meeting
agMa Cg-1 and Cg-2 Standards each time driveshaft is installed or
premature wear and equipment failure can occur.
7. Connect ASABE Standards 7 terminal connector for safety/warning lights on planter to ASABE Standards
receptacle on tractor. If your tractor is not equipped with an ASABE Standards receptacle, check with your tractor
manufacturer for availability. Check warning lights on planter work in conjunction with warning lights on tractor.
nOTe: a 12 volt battery connection is required to power the vacuum fan digital gauge. Connect “red” wire to
positive (+) battery terminal and “black” wire to negative (-) battery terminal.
nOTe: a tractor model-specific pTO mount kit is required and available from gnL engineering (319-227-7222
or gnlengineering.net) and rowe Manufacturing (800-544-4123 or rowemfg.com).
Completely raise parking jack to prevent damage to jack assembly and equipment when moving planter.
TranSpOrTing pLanTer
warning
Uncontrolled movement of equipment can cause loss of control
and could result in death, serious injury, or damage to property and
equipment. install all safety pins before transporting equipment.
warning
Uncontrolled machine movement can crush or cause loss of control
resulting in death, serious injury, or damage to property and equipment.
install all safety lockup devices before working under or transporting
this equipment.
Make sure safety/warning lights, reflective decals, and SMV sign are in place and visible before transporting machine
on public roads. It is your responsibility to check and comply with all federal, state/provincial, and local regulations.
Be aware of road and bridge weight limits. Allow for additional weight of added options and any additional material or
substances that have been added to the machine.
warning
Transporting planter with hoppers over half full or unevenly loaded
can cause loss of control and could result in death, serious injury,
or damage to property and equipment. properly load planter when
transporting. be aware of extra transport weight, and road conditions
and limits.