JUMO 707050 dTRANS T05 - Programmable 2-Wire Transmitter Operating Manual - Manual (Page 70)

6 Appendix
32
6.1.6 Voltage supply
6.1.7 Environmental influences
707050 707051
Voltage supply (U
b
) DC 11 to 35 V (with reverse voltage protection
a
)
Only for operation in SELV, PELV current circuits according to DIN EN 50178
Voltage supply error  ± 0.01 %/V deviation from 24 V b
a Prerequisite for use of the voltage output of type 707051 is a supply voltage of at least 15 V
b
All specifications refer to the measuring range end value of 20 mA
707050 707051
Operating temperature range -40 to +85 °C -10 to +70 °C
Storage temperature range -40 to +100 °C -10 to +70 °C
Temperature influence
RTD temperature probe  ±0.005 %/K deviation from 22 °C a
Resistance transmitter  ±0.01 %/K deviation from 22 °C a
Resistor/potentiometer  ±0.01 %/K deviation from 22 °C a
Thermocouple  ±0.005 %/K deviation from 22 °C a
(plus accuracy of the cold junction)
Direct current  ±0.01 %/K deviation from 22 °C a
Long-term stability  0.1 K/year b or  0.05 %/year c
Resistance to climatic condi-
tions
In terminal head, form B Rel. humidity  95 %, with condensation
Open assembly Rel. humidity  95 %, without condensa-
tion
On DIN rail Rel. humidity  95 %, without condensa-
tion
Vibration resistance
DIN EN 60068-2-6 Max. 2 g at 10 to 2000 Hz Max. 2 g at 10 to 55 Hz
DIN EN 60068-2-27 Shock; 10 g/6 ms Shock; 10 g/6 ms
Germanischer Lloyd Characteristic line 2 -
Electromagnetic compatibility
(EMC) According to DIN EN 61326-1
Interference emission Class B
Interference resistance Industrial requirements