JUMO 707050 dTRANS T05 - Programmable 2-Wire Transmitter Operating Manual - Manual (Page 59)

21
5 Configuration
Hardware and software requirements
For operation and the installation of the setup program the following hardware and software re-
quirements have to be met.
5.3 Working with the setup program
5.3.1 Establishing communication with the transmitter
The correct transmitter type must be selected in the setup program in order to use the setup
program to transfer a configuration to the transmitter or to establish the connection so that de-
vice data can be queried.
Device wizard with automatic detection of connected hardware
➥ Device and process data can be displayed and data transfer is possible. This can be per-
formed via the menu D
ATA TRANSFER > D ATA TRANSFER TO DEVICE ... or D ATA TRANSFER
FROM DEVICE ... or the corresponding buttons.
Device wizard with custom setting
TAG number (10-digit) and description (20-digit)
Installation date
Data pertaining to version, process and device of the transmitter can be displayed
Microsoft
a
Windows
a
XP, Windows Vista
a
, Windows 7 32-bit/64-bit
a Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation.
1 GB RAM
200 MB free hard disk space
1 USB interface
Step Activity
1 Connect the transmitter with the USB cable.
2 Start the setup program.
3 In the navigation window, double-click S ETUP > C ONFIGURATION > H ARDWARE .
4 In the device wizard, select A UTOMATIC DETECTION and click N EXT .
5 Once the correct type is displayed, click F INISH .
6 The transmitter is connected.
Step Activity
1 Connect the transmitter with the USB cable.
2 Start the setup program.
3 In the navigation window, double-click S ETUP > C ONFIGURATION > H ARDWARE .
4 In the device wizard, select U SER - DEFINED SETTING and click N EXT .