JUMO 707050 dTRANS T05 - Programmable 2-Wire Transmitter Operating Manual - Manual (Page 62)

5 Configuration
24
5.3.3 Drag indicator function
The drag indicator function records the minimum and maximum process variables (e.g. tem-
perature) that appeared on the sensor during transmitter operation. These values can be reset.
The reset times for the drag indicator are saved in the device and are also displayed. In addition
to the actual minimum and maximum process values, the time at which the respective variables
occurred will be displayed – measured in operating hours since the reset time. This enables
conclusions to be drawn with regard to special features of the plant.
To view this data, the O
NLINE DATA checkbox in the W INDOW menu must be selected in the set-
up program and the P ROCESS DATA tab must be selected at the bottom of the setup program
window.
The drag indicator can be reset via the menu item E XTRAS > R ESET DRAG INDICATOR .