Heidolph LABOROTA 20 automatic - Manual (Page 112)

112
E
41. RS 232 interface commands
query
Command action remarks
Act commands
VAC? Act Vacuum
VAP? Act Vapor
BATH? Act Bath
CHILL? Act Chiller
SPEED? Act Speed
TIME? Act Time elapsed time, continuous operation
COUNT? Act Time time, timer mode
Safety functions
SC? Safety Cover 0 = action; 1 = no action
FS? Flask Support 0 = action; 1 = no action
RS? Rotation Stop 0 = action; 1 = no action
OP? Over-
Temperature
Prot.
0 = action; 1 = no action
triggering
Command action remarks
Set commands
VAC=XXXX! Set Vacuum 4-digit in mbar; range set 0000 to 1200
BATH=XXXX! Set Bath
4-digit, in 1°C increments
range set 0000 to 1800 equals 0.0 to 180.0
SPEED=XXX! Set Speed 3-digit, in rpm; range set 000 to 180
TIME=XXXX! Set Timer
4-digit, in hh:mm
range set 0000 to 9959 equals 00:00 to 99:59
Actions
SVX! Start Stop Vacuum SV0! = OFF ; SV1! = ON
VVX! Valve vacuum valve; VV0! = CLOSE ; VV1! = OPEN
BVX! Ventilation aerating valve; BV0! = CLOSE ; BV1! = OPEN
SBX! Start Stop Bath SB0! = heater OFF ; SB1! = heater ON
SSX! Start Stop Speed SS0! = rotation OFF ; SS1! = rotation ON
LU! lift UP
LD! lift DOWN